How LED Inflatable Decorations Are Put Together
An illuminated inflatable figure is a fabric envelope filled with air and fitted with a light source so that its shape is visible in an event space after dark. It may be static or moving. Its silhouette may be lit directly or indirectly or internally, and it may be fitted with special lighting effects. It may be used indoors, outdoors or both.
Figure: A red and green inflatable character is illuminated outdoors at night. Its face and hands are visible against the dark setting.
Fabric and Shape
HELLO INFLATABLE uses PVC Oxford fabric, PVC tarpaulin and Rip Stop Nylon across its inflatables. Confirm the fabric chosen for the custom piece.
Illumination may be internal or external. External illumination may be provided by arrays of floodlights, or by other sources, so placed that the luminaires remain out of sight of the audience.
Blower and Inflation
The maker offers 110–120V and 220–240V blower options with plugs chosen for the destination. Some designs require a blower. Its voltage does not specify the LED power arrangement. The electrical particulars of the figure, the blower and any lighting equipment should be obtained from the maker and should be checked against the supply available at the venue before the figure is delivered.
LED Lighting and Power
The maker’s inflatable photo booth has RGB LED lights. Check the lighting specification of any other model before ordering.
LED Inflatable Decorations by Placement
Hanging Displays
HELLO INFLATABLE supplies an LED rose flower chain and a hanging inflatable star with LED light. Confirm the ceiling support and hanging position at the venue.
Figure: Star-like inflatable forms hang above an event space at night. The lighting gives them a strong outline from below.
A hanging figure should be suspended from a point that has been confirmed as suitable by the venue, and the suspension should be designed and installed for the load of the figure. Its final height and fixing point belong in the venue drawing.
The order should specify the full run of a rose flower chain, not only one flower. A series of units must fit the planned span above the event space.
Ground-Level Displays
The range includes an LED inflatable eyeball and an outdoor inflatable tiger figure; lighting for the tiger must be checked for a particular order. Leave room for guests at a photo spot, and discuss anchoring for outdoor use.

Figure: A flower-and-butterfly inflatable arch is shown indoors. Check the clear opening and overall footprint before placement.
A floor figure should be placed on a level surface, and should be anchored against displacement by the public or by wind. Several figures may be arranged at an event.
The arrangement should be planned so that the figures do not obscure one another and so that their power supplies and their anchorage are clear of the public. A figure placed at the entrance should be visible from the approach and should not obstruct the entrance itself.

Figure: A character inflatable is illuminated outdoors at night. Allow enough room around it for guests to pass.
An indoor figure should fit within the available floor area and height, and should clear any overhead services before it is anchored. A figure that is to be used outdoors should be positioned so that it is visible, and so that its power supply and any guy lines are outside the public circulation area or are protected from it. The figure should not obstruct any fire exit or escape route.
An illuminated inflatable figure may be used as the subject of photographs. Photographic light may supplement the figure’s own illumination and show the figure in a different way from the event lighting.
Colour by Day and at Night
A figure intended for use after dark should be lit by external or internal sources. The lighting should be controlled so that the figure appears as intended.

Figure: A yellow cartoon inflatable glows outdoors after dark. Confirm the intended colour under the lighting planned for the event.
The colour of an illuminated figure should be specified at the time of the order in the terms in which the maker describes it, and the user should allow for the effect of the illumination on the appearance of the colour. A colour reference should be agreed between the user and the maker, and the appearance of the figure under the event lighting should be checked against it. A photograph of the figure when illuminated should be approved by the user before the event.
Custom LED Inflatable Decorations Before Delivery
Custom Drawings and Size
HELLO INFLATABLE reviews a 3D model before custom production. Check the dimensions, colours and graphics before approval.
The dimensions of the figure, the dimensions of the blower and the power requirements should be obtained from the maker’s drawing. A photograph of the finished model should be supplied by the maker before shipment.
The user should approve the maker’s drawing, including the dimensions, the colours, the graphics and the illumination, before the figure is put into production. A change made after approval may not be accommodated within the delivery period.
Checks Before Delivery
The company can provide remote setup guidance for custom projects. Confirm the exact accessory list and shipping date for the order.
Before the event, the figure should be unpacked, inflated and inspected when it is illuminated as intended. The figure should be unpacked and inspected on receipt, and any damage should be reported to the maker with photographs.
The figure should be inspected for the following:
– correct inflation;
– correct illumination;
– damage to the fabric;
– damage to the blower and its electrical supply;
– the condition of any suspension system;
– the condition of any anchorage to the ground;
– the presence of any unguarded hot surfaces or exposed live parts;
– the presence of any sharp edges that might damage the fabric;
– the presence of any loose parts that might fall.
The figure should be repacked with the blower and any lighting equipment in accordance with the maker’s instructions. The figure should be packed with the blower, the lighting equipment and the maker’s instructions in a container that protects the fabric from damage in transit.
FAQ
What is the difference between blower and LED power?
The blower voltage is listed separately from the lighting specification. Confirm both for the selected model.
Which fabrics are listed?
PVC Oxford fabric, PVC tarpaulin and Rip Stop Nylon are listed. Confirm the specification for the selected model.
Can size and color be customized?
Yes. The product listings specify customized size and color.
What should be checked before the event?
Inflation, illumination, fabric, accessories and the proposed fixing arrangement all need checking. Test them before the event.